The Best Reddit Apps for Windows and Mac

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

I have a windows 10 usb and dvd now, but neither of them show up in boot devices, so I can’t try to reinstall. Am I stuck waiting for an eternity or can I fix this? I also tried activating airplane mode, taking out the battery, and some stuff I can’t remember. The touchpad works which is funny because it never works when windows is actually running so I can see the cursor, but that’s the only response I get from it. If the laptop is stuck on the ‘ Just a Moment’ screen, unplug any USB devices, especially a wireless mouse or keyboard.

Then Start the laptop again, it will now hopefully finish the install. If that does not work, you say you have a Windows 10 installation USB, is this bootable media.

Your laptop should then boot from the Flash Drive and install a clean copy of Windows To get into your BIOS look at the screen immediately as your laptop starts, there will be text like ‘ press F2 to enter setup’, the key might also be Esc or Del.

NOTE: During the Windows installation, your laptop will reboot, at this point you must go into your BIOS and change the boot order back, so your hard drive is top of the list, otherwise the installation will start over.

Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. Hard restarts haven’t worked, I’ve taken out the battery and took the plug out after I had turned it off and pressed the power button a few times just to make sure it was reset, turned it back on, I’ve done this before too and it still gets infinitely stuck on that screen. There are currently no usb devices plugged into it, I just have my windows 10 dvd in the tray. I finally got to the bios screen, I’ve set the boot order to check for dvds and usbs first, but now when I restart it just goes back to the bios screen no matter what I press.

Currently I don’t have the hard drive as an option, so that’s probably why. But does that mean it won’t detect anything aside from the hard drive now? Will also test with usb drive and with re-enabling the hard drive as a boot option and will say what happens.

Turn your computer on and off three times. While booting, make sure you turn off the computer when you see the Windows logo. After the third time, Windows 10 will boot into diagnostics mode. Click Advanced options when the recovery screen appears. You can try booting into the Recovery environment again, then click Advanced options, then click Startup repair.

It’s worked before so I know I did it right, heh. Same thing with the USB, used the tool to create it. Currently I don’t see the windows logo when it starts up. I see the MSI logo, then the screen turns black for a moment, then it switches to the Just a moment Also I was out for a bit and when I came back it had gone to sleep and when I woke it up, the Just a moment Yes, when you see that MSI logo, you should power it on and off three times.

Systems that come preloaded with Windows 10 will use the manufacturers logo instead of the Windows logo. Power down your computer, start it the immediately start striking the F3 key repeatedly. This will take you to the recovery environment. I’ve tried the F3 thing a couple times. It either goes to the Just a moment When it bluescreens, it starts off with a Please Wait, then I get this error code:.

Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member. Get a normal working computer to obtain this software and then refer to the following guide to build a bootable medium and start the unbootable machine from it:. Choose the target partition you need to restore data from and click on the Scan button to start the scanning process. When the scanning process ends, you can see the scan results which are classified by path.

You can open each path to find the files you want to restore. Usually, there are numerous files on your computer hard drive and it is usually difficult to find out the needed ones quickly.

In this situation, you can try the Type and Find features of this software to locate your needed files easily. Additionally, with the Bootable Edition, you can preview the image files and text files which are no larger than 20MB.

That is to say, when you are not sure whether it is the image or text file you need to restore, you can use the Preview feature to identify.

Connect an external drive which has enough space to store your needed files to your computer and then check the files you want to restore. After that, press the Save button to choose the inserted external drive to keep the selected items. Now, your needed data is saved to a safe place. Next, you need to create a USB bootable medium. Go to the next part the get the steps. Click to tweet. Go to the Windows 10 download page on the web browser.

Press the Accept button to agree to the Applicable notices and license terms. In the following interface, you can select language, architecture, and edition you want to use. Select the USB flash drive option and click the Next button to continue.

When you see the Your USB flash drive is ready interface, press the Finish button to end the process. After these steps, you can use this USB flash drive to perform a clean install on the computer which is bothered by Windows 10 stuck on Just a moment issue.

To perform a clean install of Windows 10 with the bootable USB flash drive, you need to follow these steps:. When entering the Windows setup interface, press the Next button to start the process. When entering the following interface, click the Install Now button to continue. If you’re upgrading an old version, you must input a genuine product key. However, if you’re reinstalling Windows 10, you can press the I don’t have a product key option to continue if your computer has been activated.

Choose a Windows 10 edition that must match your product key and press the Next button to continue. Check the I accept the license terms option and then press Next to continue. Then you need to choose where to install Windows Usually, it is a partition on Drive 0 that contains the current installation of Windows. Then, press the Delete button to remove it from the hard drive. Choose the empty partition and click on the Next button to start the installation process. After the installation, you still need to customize the out-of-box experience to create a new account and set up your environment.

Read this post to learn them and choose a proper one for OS reinstallation. When you are getting in the trouble of Windows 1 Just a moment loop, you can refer to these two solutions mentioned in this post to help you out. If you are bothered by some other issues when dealing with this issue, you can just send an email to [email protected] or let us know in the comment.

Of course, you can also share your opinions or suggestions here. Download Power Data Recovery.

 
 

 

How to Download Videos from Reddit on PC/iPhone/Android? – Question Info

 

After reading this post, you must have learned how to download videos from Reddit. If you have any questions about how to save Reddit videos, please leave a comment below. She was graduated from the major in English. She has been the MiniTool editor since she was graduated from university. She is also good at writing articles about computer knowledge and computer issues. In daily life, she likes running and going to the amusement park with friends to play some exciting items.

Facebook Twitter Linkedin Reddit. About The Author. Valve has promised a native dual-booting option with a future SteamOS 3 release, but this hasn’t arrived yet. If you just want to experiment with Windows, use the method above. If you’re willing to dive into the full experience and don’t mind deleting your data, continue on.

Step 1: To start, you need to create a Windows installation drive. We outline how to do that in our guide on how to install Windows 11 , but the process is straightforward. Download the Windows media creation tool and create an installer on your USB drive.

You’ll need a USB drive with at least 16GB of storage, but the tool will walk you through the steps otherwise. Although you can connect the drive directly, I strongly recommend connecting it with a USB-C hub to avoid any issues. A keyboard and mouse are good for installation, too, and a USB-C hub will allow you to connect those peripherals. Step 3: Power on the Steam Deck while holding the Volume down button to enter the boot manager.

Select your USB drive with the Windows installer to continue. Step 4: Like before, Windows will boot in portrait mode. Select the Windows version you want and then choose Install now. I highly recommend connecting a keyboard and mouse here. You can get through installation with the touchscreen, but the Steam Deck’s keyboard and the touchpads won’t work. You’ll be asked to activate Windows after. Enter your product key if you have it, or choose I don’t have a product key to continue. Step 5: On the following screen, choose Custom: install Windows only.

You’ll need to delete partitions on the Steam Deck in order to install Windows. It’s possible to restore SteamOS later, but you’ll need to reinstall all of your games and reconfigure your settings.

Step 6: Choose a partition you want to delete and select Delete. I recommend choosing the largest of how ever many partitions you have. The GB model, at least, comes with eight partitions. Step 7: Choose the partition you deleted, which should show up as Unallocated space , and select Next. Windows will begin installing on the drive. Step 8: After a bit of time and an automatic reboot, you’ll load into the normal Windows setup.

We will be glad to help you out! All download links of apps listed on Napkforpc. For the app from Google Play Store, Napkforpc. For the app submitted by users, Napkforpc. Sponsored Links. App preview [ see all 10 screenshots ].

After successful installation, open Bluestacks emulator. Step 3 : It may take some time to load the Bluestacks app initially. Once it is opened, you should be able to see the Home screen of Bluestacks.

Step 4 : Google play store comes pre-installed in Bluestacks. On the home screen, find Playstore and double click on the icon to open it. Step 5 : Now search for the App you want to install on your PC. In our case search for Reddit to install on PC. Step 6 : Once you click on the Install button, Reddit will be installed automatically on Bluestacks.

You can find the App under list of installed apps in Bluestacks. The latest version of Bluestacks comes with a lot of stunning features. Bluestacks4 is literally 6X faster than the Samsung Galaxy J7 smartphone. So using Bluestacks is the recommended way to install Reddit on PC. You need to have a minimum configuration PC to use Bluestacks. Here is the Download link for you — Memu Play Website. Open the official website and download the software.

Step 2 : Once the emulator is installed, just open it and find Google Playstore App icon on the home screen of Memuplay. Just double tap on that to open. Step 3 : Now search for Reddit App on Google playstore. Find the official App from reddit Inc. You Might Also Like Hockeyappen. KPLR HenesiZ – News On Demand. Free Crowd Media App. Haber Kurulu. Russia Newspapers. News